In this blog post, we’re going to tell how to setup a Scalable Ant Media Server Cluster in Alibaba Cloud. This solution that really cut the costs for projects that need scalable Ultra-Low latency streaming. Let me explain how. Assume that your project needs scalable ultra low latency streaming. There are a few options to start.
- Implement your own ultra low latency solution.
- Use one of the Platform as a Service (PaaS) solutions.
- Use a scalable software solution that you can run on your own cloud. You’ll just use your own Infrastructure as a Service (IaaS) to create your streaming service.
Actually, first option is something like inventing the wheel again. It likely takes long time according to your expertise. Second option is ok if you have good amount of budget. The third option seems best in terms of low cost and full control. It just requires some experience in cloud.
Infrastructure as a Service is already rising
When you have your own scalable ultra low latency streaming service, then you can take advantage of several things. For instance, you likely have an agreement with your Infrastructure as a Service (IaaS) provider(Alibaba, AWS, Azure,…) about some discounts. So that you can use these discounts for your streaming service as well. Another option is that you will have the full control to scaling your streamers and viewers. In other words, Infrastructure as a Service is already rising. Let it rise for you.
Let’s get started how to start your own scalable ultra low latency streaming service on Alibaba Cloud.
Getting Started for Ultra Low Latency Streaming Service on Alibaba Cloud
Here is the system outline
Let’s start with brief definitions
- MongoDB Database Server: Ant Media Server uses MongoDB in clustering. Streams information are saved to MongoDB so that edge instances can learn any stream’s origin node.
- Load Balancer: LB is the entrance point for the publishers and players. Load Balancer accepts the requests from publishers or players and forwards the requests to the available node in the cluster.
- Origin Auto-Scalable Group: Nodes(Instances) in the origin group accepts the publish requests and ingest the incoming WebRTC stream. When an origin instance accepts a WebRTC stream, it saves the related information to the MongoDB Database Server. There may be one node or multiple node in origin group. It may even be manually or auto scalable. In our deployment, it’s auto-scalable in Alibaba.
- Edge Auto-Scalable Group: Node(Instances) in the edge group accepts the play requests. Then it learns from MongoDB which origin node has the related stream. After that it gets the stream from related origin node and sends the stream to the player.
Then continue with installing MongoDB Server
Step 1: Install MongoDB Server
The procedure below shows how to start an instance in Alibaba Elastic Compute Service as well. In other words, if you have no experience with Alibaba, you can even install MongoDB Server as follows. If you know how to start an instance in Alibaba, just skip to “Install MongoDB to Your Instance”
- Signup to Alibaba Cloud if you don’t have an account yet. Login to Alibaba Cloud Console. Then click Elastic Compute Service as shown in the image below.
- Click
Create Instance
.
- Select
Billing model
andInstance type
according to your use case.
- Choose
Instance Type
likeEnhanced General Purpose Type g6e series
.- You may optionally choose a bigger instance according to your streaming load.
Search for Ubuntu
and Select Ubuntu 18.04
and Click Next
button
- Create a
VPC
andsecurity group
You need to have VPC
and security groups
for creating MongoDB instance. If you already have VPC
and Security Group
options, you can skip Create VPC
and Create Security Group
parts.
Create VPC
- Go to
Elastic Compute Service / Network & Security / Virtual Private Cloud
section and clickCreate VPC
button.
- Fill
Name
andIPv4 CIDR Block
parameters.
- You need to have 2 vSwitch for loadbalancing mechanism. Fill vSwitch
Name
,Zone
andIPv4 CIDR Block
parameters.
Create Security Group
- Go to
Elastic Compute Service / Network & Security / Security Groups
section and clickCreate Security Group
button.
- Add
22
and27017
TCP ports as follows in the image.
- Go back to creating instance steps.
- You need to create an
SSH key
. If you already created an SSH key, you can skip SSH key step.
- After creating the SSH key, just click “Create Instance” button
- Login your Instance according to Instance public IP address with a created SSH key.
- Right now, you should connect to your instance. To Connect your instance, open a terminal and run a command something like. Please change {YOUR_KEY_FILE} and {INSTANCE_PUBLIC_IP} with your own credentials.
ssh -i {YOUR_KEY_FILE} root@{INSTANCE_PUBLIC_IP}
Install MongoDB to Your Instance
- After you get connected, run the following commands in order to install MongoDB to your instance
wget -qO - https://www.mongodb.org/static/pgp/server-4.2.asc | sudo apt-key add -
echo "deb [ arch=amd64 ] https://repo.mongodb.org/apt/ubuntu `lsb_release -cs`/mongodb-org/4.2 multiverse" | sudo tee /etc/apt/sources.list.d/mongodb-org-4.2.list
sudo apt-get update
sudo apt-get install -y mongodb-org
- Open /etc/mongod.conf file with an editor like nano and change bind_ip value to 0.0.0.0 to let MongoDB accept connections in all interfaces and save it.
sudo nano /etc/mongod.conf
Press Ctrl + X
to save the file.
Restart mongod and enable service.
sudo systemctl restart mongod
sudo systemctl enable mongod.service
MongoDB installation is complete, just save your MongoDB instance’s local address somewhere. We will use it in later.
Step 2: Install Scalable Origin Group
- Click “Deployment & Elasticity > Auto Scaling” and Click “Create” button.
You need to have a Launch template for creating Instances. If you already have the Launch template, you can skip Create a Launch Template
parts.
Create a Launch Template
- Click “Deployment & Elasticity > Launch Template” and Click “Create Template” button.
- Select
Ant Media Marketplace image
,VPC network
and clickAssign Public IPv4 Address
as follows.
- Select
Ant Media Server Enterprise Edition
as follows.
- Select/create Security Group as follows
- Select VPC Network and click
Next Advanced Configurations
- Add SSH key pair, Instance name and User Data details as follows. Right now, copy the text below, change the “{MongoIP}” field with the MongoDB IP Address in the script and paste it to the “User data”.
#!/bin/bash
cd /usr/local/antmedia
./change_server_mode.sh cluster {MongoIP}
After that Click “Confirm Complete Configuration”
- Take a look at Launch Template and click Confirm Template Configuration
- Go back to Create Scaling Group steps and use created Launch Template.
- Set
Minimum Number of Instances
,Maximum Number of Instances
andExpected Number of Instances
andDefault Cooldown Time (Seconds)
as follows
- Set
VPC
,Select vSwitch
andCreate Associated ALB Server Group
- Set
Server Group Name
andVPC
fields as follows
- Go back to
Create Scaling Group
steps and select created Server Group as follows
- Click
Enable the scaling group
text as follows
- Enable Autoscaling as follows
Step 3: Install Scalable Edge Group
Installing scalable edge group almost same as scalable origin group. Please go to Step 2: Install Scalable Origin Group and do the same things one more time. Just don’t forget to change some namings(for instance give group name as Edge Group) and configure scaling policy and instance type according to your needs. If you have any question or problem with this, please let us know through contact@antmedia.io
Step 4: Install Load Balancer
- Click the “Server Load Balancer > ALB > Instances” on Alibaba Products and Services and Click the “Create ALB Instance” button as follows
- Fill the fields as follows
- You need to add listeners to load balancers as follows
- You need to have SSL. But no need to buy certificate. Just click
Buy Certificate
text.
- After click
Buy Certificate
button, just clickUpload Certificate
button and upload your custom certificate. You can get free let’s encrypt SSL with https://zerossl.com service.
- Just add created Server group
- Add listeners ports to origin/edge groups
-
- Right now Everything is ok. Just let me give a brief information about the difference between publish and play. In our load balancer configuration, we forward HTTP(80) and HTTPS(443) to Origin Group and we forward HTTP(5080) and HTTPS(5443) to Edge Group. It means that we should connect 80 or 443 ports to publish and connect 5080 or 5443 to play streams. Otherwise, play requests goes to origin group and publish request goes to edge group and it’s likely create some performance issues according to your configurations.
Logging to Web Panel
You can login to web panel via the https://your-domain-name/. After these steps, you just need to add your domain address CNAME to your Load Balancer URL. You just need to register a first user!
Test Fly
- For publishing please visit the https://your-domain-name/WebRTCAppEE/ and click “Start Publishing” button. The default stream id is “stream1”
- For playing please visit the https://your-domain-name:5443/WebRTCAppEE/ and click “Start Playing” button. The default stream will be played
- As you figure out, we connect default https port(443) for publishing and 5443 port for playing. Because we configure load balancer to forward default port(443) to origin group and 5443 to edge group.
It’s a little complex to make the installation. If you’re stuck in somewhere, please reach out to us to make the installation together.
If we receive requests from Alibaba users, we’re happy to provide some easy and quick methods to make the installation by using Resource Orchestration Service